You are here:
SINGLE WALL SW SYSTEM
SINGLE WALL SW SYSTEM
Single wall SW system is composed by modular elements with BA surface finish, m…
Single wall SW system is composed by modular elements with BA surface finish, made of austenitic stainless steel AISI 316L BA (1.4404) minimum thickness of 0.4 mm, according to the standards set out by the European CE mark, EN 1856-1 and EN 1856-2. The modular elements have classic calibrate malefemale junction, with triple seal lip gasket, conforming to European standard EN 14241-1, and mechanical connection with locking clamp.
Normative references and designation
Product marking according to the European standard CE 0476 EN 1856-1 / EN 1856-2.
T200 P1 W V2 L50040* O 30 with seal
T600 N1 W V2 L50040 G
T600 N1 W V2 L50040 G 500M
T200 H1 W V2 L50040 O30 with special seal on request
* The designation may vary according to the quality and thickness of the raw material, as indicated in the table below:
Utilizations
Ducts, flue pipes, metal chimneys, air conduction subservient to atmospheric heat generators, pressurized, air blown, traditional or condensing, industrial or domestic kitchen hoods, wood stoves, fireplaces or pellet stoves.
Application
Internal installation.
Available diameters – mm
SW04 thickness 0.4 mm
50 – 60 – 80 – 100 – 120 – 125 – 130 – 140 – 150 – 160 – 180 – 200
SW05 thickness 0.5 mm
220 – 250 – 300 – 350 – 400.
- 450 – 500 ON REQUEST •
Available diameter up to 800 ON REQUEST