You are here:
DOUBLE WALL SDW50 SYSTEM
DOUBLE WALL SDW50 SYSTEM
Double wall SDW50 system is composed by modular rigid elements with BA surface…
Double wall SDW50 system is composed by modular rigid elements with BA surface finish, made with the inner wall of stainless steel AISI 316L minimum thickness of 0.4 mm and outer wall in stainless steel AISI 304, according to the standards set out by the European CE mark, EN 1856/1. Insulation made of high density mineral wool 50 mm thickness, pressed and interposed between the walls without connecting elements between the same (thermal junction). The modular elements have classic male-female junction calibrated for both sides, with triple seal lip gasket, conforming to European standard EN 14241-1, and mechanical connection with locking clamp.
Normative references and designation
Product marking according to the European standard:
CE 0476 EN 1856-1.
T200 H1 W V2 L50040* O xx with seal a three lips tilted down – Ø 80 ÷ 300
T200 P1 W V2 L50040* O xx with seal
T600 N1 W V2 L50040 O zz / G yy without seal
* The designation may vary according to the quality and thickness of the raw material, as indicated in the table below:
Utilizations
Ducts, flue pipes, metal chimneys, air conduction subservient to atmospheric heat generators, pressurized, air blown, traditional or condensing, industrial or domestic kitchen hoods, wood stoves, fireplaces, pellet stoves. Particularly used with high temperatures heating systems.
Application
Internal or external installation.
Available diameters – mm
- 80/180 – 100/200 – 130/230 – 150/250 – 180/280 – 200/300 – 250/350 – 300/400 – 350/450 – 400/500 – 450/550 – 500/600 ON REQUEST •
Available internal diameter up to 800 ON REQUEST