You are here:
DOUBLE WALL DWC25 SYSTEM EXTERNAL WALL COPPER
DOUBLE WALL DWC25 SYSTEM EXTERNAL WALL COPPER
Double wall DWC25 system is composed by modular rigid elements with surface…
Double wall DWC25 system is composed by modular rigid elements with surface finish in natural copper, made with the inner wall of stainless steel AISI 316L minimum thickness of 0.4 mm and outer wall in natural copper thickness of 0.5 mm, according to the standards set out by the European CE mark, EN 1856/1. Insulation made of high density mineral wool 25 mm thickness, pressed and interposed between the walls without connecting elements between the same (thermal junction). The modular elements have classic male-female junction calibrated for both sides, with triple seal lip gasket, conforming to European standard EN 14241-1, and mechanical connection with locking clamp.
Normative references and designation
Product marking according to the European standard:
CE 0476 EN 1856-1.
T200 H1 W V2 L50040* O xx on request
T200 P1 W V2 L50040* O xx with seal
T600 N1 W V2 L50040 O zz / G yy without seal
* The designation may vary according to the quality and thickness of the raw material, as indicated in the table below:
Utilizations
Ducts, flue pipes, metal chimneys, air conduction subservient to atmosferic heat generators, pressurized, air blown, traditional or condensing, industrial or domestic kitchen hoods, wood stoves, fireplaces, pellet stoves.
Application
Internal or external installation.
Available diameters – mm
80/130 – 100/150 – 130/180 – 150/200 – 180/230 – 200/250 – 250/300 – 300/350
- 350/400 ON REQUEST •
Available internal diameter up to 800 ON REQUEST