You are here:
DOUBLE WALL AIR ADW10 SYSTEM
DOUBLE WALL AIR ADW10 SYSTEM
Double wall air ADW10 system is composed by modular rigid elements with BA surfa…
Double wall air ADW10 system is composed by modular rigid elements with BA surface finish, made with the inner wall of austenitic stainless steel AISI 316L BA (EN 1.4404) minimum thickness of 0.4 mm and outer wall in austenitic stainless steel AISI 304 BA (EN 1.4301) thickness 0.4 mm, according to the standards set out by the European CE mark, EN 1856/1-2. Insulation made with ”air-blade” system, 10 mm thickness. The modular elements have classic male-female junction calibrated for both sides, with triple seal lip gasket, conforming to European standard EN 14241-1, and mechanical connection with locking clamp.
Normative references and designation
Product marking according to the European standard:
CE 0476 EN 1856-1 / EN 1856-2.
T200 P1 W V2 L50040* O 20 with seal
T600 N1 W V2 L50040 G500 M
* The designation may vary according to the quality and thickness of the raw material, as indicated in the table below:
Utilizations
Ducts, flue pipes, metal chimneys, air conduction subservient to atmospheric heat generators, pressurized, air blown, traditional or condensing, industrial or domestic kitchen hoods, pellet stoves.
Application
Internal or external installation.
Available diameters – mm
- 60/80 ON REQUEST •
80/100 – 100/120 – 130/150 – 160/180 – 180/200 – 200/220
- 230/250 ON REQUEST •
Diameter 250/270 available ON REQUEST